Matcha™ Spin SI How To, Manual and Installation
meet matcha™ spin SI, our 3-in-1 rotating convertible car seat with side-impact protection, made for safe and simple everyday journeys.

at a glance
| product dimensions | l 19.7 x w 18.8 x h 22.5-33.6 in. |
| weight | 29.21 lb. |
| usage | 4 lb. up to 100 lb. |
| rear-facing with harness | 4 lb. up to 40 lb. | up to 43 inches |
| forward-facing with harness | 30 lb. up to 65 lb. | up to 49 inches |
| highback booster | 40 lb. up to 100 lb. | up to 57 inches (at least 4 years old) |
| manual | available to download below |
| video | 5 guides |
fitting in your car
matcha™ spin SI installs with the lower anchor attachments or your vehicle seat belt, as set out in the instruction manual. The check that matters: once fitted, give the seat a firm wiggle where it meets the car. A correct fit stays put. If anything moves more than a little, take it out and start again... it takes a minute and it is always worth it.
using matcha™ spin SI day to day
Buckle up the same way every time: straps lying flat and snug, nothing twisted, and the headrest climbing as your little one grows. The instruction manual shows every adjustment, so the fit stays right, ride after ride.
washing and caring for matcha™ spin SI
Crumbs, spills and sticky fingers are all part of the fun. Check the wash label stitched into the fabric and the care section of the manual for what comes off, then let the washing machine take care of the rest. Frames and plastics wipe clean with a damp cloth and mild soap, no harsh cleaners needed. One rule above all: if matcha™ spin SI has been through an accident, retire it and replace it, safety first.
features
- Tested to the newest safety standards, FMVSS 213a and 213b Side impact protection (SIP) bolsters for use up to 40 lb. protect your littlest passengers Guard Surround Safety™ pods and bolster offer side impact protection in the event of a crash Easy-to-read level indicator makes it easy to tell if your seat is at the correct angle for baby TurnLock™ indicator is color-coded to show if the seat is locked in place 360⁰ spin turns the car seat toward you, so you can lift your child straight in and out of the car (360⁰ spin is usable for rear and forward modes) 180⁰ spin in highback booster mode can make it easier for your independent big kid to get in themselves! The turning activators are positioned on either side of the seat where they’re easy to reach AutoClick™ magnetic chest clip perfectly positions your child's harness to keep them secured in their seat The GrowTogether™ headrest and harness adjust simultaneously to 15 positions to give your child a safer and more comfortable fit LockTight™ belt tensioner and lock-off for added security and easier install Use the lower anchor attachments in highback booster mode to help keep the seat secure
watch and learn
videos (5)
rear-facing with lower anchor attachmentswatch rearward-facing with vehicle seat beltwatch forward-facing with LATCHwatch forward-facing with vehicle seat beltwatch i as a highback boosterwatchdid this help?
we read every bit of feedback.