Pepper™ Spin SI How To, Manual and Installation

updated

meet pepper™ spin SI, our 360⁰ rotating 4-in-1 car seat, made for safe and simple everyday journeys.

pepper™ spin SI

at a glance

model C2327AA
product dimensions l 21 x w 19.2 x h 25.9-34.2 in.
weight approx. 32.4 lb.
usage 4 lb. up to 120 lb.
rear-facing with harness 4 lb. up to 40 lb. | up to 43 inches
forward-facing with harness 30 lb. up to 65 lb. | up to 49 inches
highback booster 40 lb. up to 100 lb. | up to 57 inches (at least 4 years old)
backless booster 50 lb. up to 120 lb. | 43 up to 60 inches (at least 4 years old)
testing certification FMVSS 213a and 213b
manual available to download below
video 4 guides

fitting in your car

pepper™ spin SI installs with the lower anchor attachments, your vehicle seat belt or the top tether when forward facing, as set out in the instruction manual. The check that matters: once fitted, give the seat a firm wiggle where it meets the car. A correct fit stays put. If anything moves more than a little, take it out and start again... it takes a minute and it is always worth it.

using pepper™ spin SI day to day

Buckle up the same way every time: straps lying flat and snug, nothing twisted, and the headrest climbing as your little one grows. The instruction manual shows every adjustment, so the fit stays right, ride after ride.

washing and caring for pepper™ spin SI

Crumbs, spills and sticky fingers are all part of the fun. A few things worth knowing about keeping pepper™ spin SI fresh: the removable cover pops right off the seat so you can shake out any crumbs and let the washing machine take care of the rest; removable infant insert gives babies a perfect fit in their car seat and can be easily removed for machine washing. For everything else, the wash label stitched into the fabric and the care section of the manual have the answer, and frames and plastics wipe clean with a damp cloth and mild soap. One rule above all: if pepper™ spin SI has been through an accident, retire it and replace it, safety first.

features

  • Tested to the newest safety standards, FMVSS 213a and 213b
  • 5-point harness restrains children across their sturdiest body parts
  • Anti-rebound panel built into the base keeps the car seat firmly in place and reduces the movement of the car seat in the event of a crash
  • Side impact protection (SIP) bolsters for use up to 40 lb. protect your littlest passengers
  • Guard Surround Safety™ pods and bolster offer side impact protection in the event of a crash
  • Bubble-level indicator makes it easy to tell if your seat is at the correct angle for baby
  • 360⁰ spin turns the car seat toward you, so you can lift your child straight in and out of the car (360 spin is usable for rear and forward modes)
  • 180⁰ spin in highback booster mode can make it easier for your independent big-kid to get in themselves!
  • Easily transitions to a backless booster seat with a one-hand pull
  • The turning activators are positioned on either side of the seat where they’re easy to reach
  • AutoClick™ magnetic chest clip perfectly positions your child's harness to keep them secured in their seat
  • The GrowTogether™ headrest and harness adjust simultaneously to 15 positions to give your child a safer and more comfortable fit
  • 2 removable, easy-clean cup holders keep road trip essentials (cup, snack, pacifier, toys) close within your child’s reach
  • The removable cover pops right off the seat so you can shake out any crumbs and let the washing machine take care of the rest
  • Buckle holders keep the harness straps out of the way while you're buckling your child in
  • Easily tuck away the harness once your child is ready to buckle up with the vehicle seat belt in booster mode
  • Removable infant insert gives babies a perfect fit in their car seat and can be easily removed for machine washing
  • Comfy 4-position recline both forward and rearward-facing
  • Harness and buckle covers are optional and can be added or removed as needed
  • LockTight™ belt tensioner and lock-off for added security and easier install
  • Multiple ways to install using the seat’s push button lower anchor attachments, LATCH or the vehicle belt (and top tether for forward-facing)
pepper™ spin SI instruction manualPDFdownload

watch and learn

videos (4)

rear facing with lower anchor attachmentswatch rear facing with seat beltwatch highback boosterwatch backless boosterwatch

did this help?

we read every bit of feedback.